Skip to content
NRC Logo

Viton® / FKM Extrusions

Custom Viton® / FKM fluoroelastomer extrusions to your drawing or sample: profiles, channels, bulb seals, tubing and cord in solid FKM. FKM combines heat resistance with resistance to fuel, oil and many chemicals, which is why it is used in fuel systems, engines and chemical processing.

Solid or sponge silicone is rated as high as FKM, stays flexible in deeper cold and comes in FDA-compliant grades, and fluorosilicone adds fuel and oil resistance to silicone. Tolerances are held to RMA classes: E2 is typical, and tighter on request.

Solid Viton® / FKM profiles, channels, tubing and cord. Quick lead times.

  • Solid Viton® / FKM profiles, 60–90 Shore A
  • Heat, fuel, oil and chemical resistance
  • Viton® brand or generic FKM, as your drawing calls out
  • Silicone extrusions in FDA-compliant grades, -65 °F to +400 °F
  • Splicing into endless rings and frames, PSA backing
  • Quotes within 1-2 business days
Solid extruded rubber cord in black, orange, grey and white

Viton® / FKM extrusion specifications

Viton® / FKM extrusions: shapes, callouts, tolerances and put-ups
SpecificationDetail
ProfilesCustom cross-sections to your drawing, in inch and metric sizes
Channels and stripsU-, C- and H-channels; L, T and P strips; P and E weather strips (H, L, T, P and E strips)
Bulb, P and D sealsHollow sealing profiles for doors, lids and hatches, to your drawing
Tubing and cordRound tubing to the ID and OD on your drawing; solid cord for O-rings and splicing (Rubber tubing)
Material calloutsASTM D2000 line callouts (FKM: HK) (ASTM D2000 callouts)
TolerancesRMA E1, E2 or E3; E2 typical, tighter on request (RMA tolerance classes)
Put-upsCoils, spools or rolls, or cut to length; the coil length is stated on the quote
DiesWe cut our own extrusion dies; a new die is a one-time line on the quote
Testing and inspectionDurometer, rheometer cure, tensile and elongation testing; dimensional inspection against your drawing

Silicone or Viton® / FKM extrusions

Both take high heat and resist ozone and weathering. Silicone stays flexible in deeper cold; FKM adds resistance to fuel, oil and many chemicals. Typical published values for each material:

Silicone or Viton® / FKM extrusions
PropertySiliconeViton® / FKM
Typical temperature range-65 °F to +400 °F-15 °F to +400 °F
Petroleum oils, fuels and lubricantsNot for gasoline and other fuels; fluorosilicone adds fuel and oil resistanceResists
Ozone and weatheringResistsResists
Hot water and steamWater; not high-pressure steamNot for hot water and steam in standard grades

Silicone is extruded solid 30–80 Shore A or as sponge, in red, black, white, clear, blue and grey plus orange, green and yellow, and in FDA-compliant grades. Fluorosilicone is one of the silicone types we extrude. Send one drawing and we can quote the profile in both.

Materials

Extruded in the grade, durometer and color on your drawing.

Viton® / FKM Extrusions: materials
MaterialNotes
SiliconeSolid 30–80 Shore A, or sponge: soft, medium or firm. FDA-compliant and other grades
Viton® / FKM60–90 Shore A; profiles, tubing and cord to your drawing

Standard profiles in our catalog

Sizes with drawings and dimension tables. Any of them can be quoted in silicone or in FKM.

Silicone extrusions

Solid and sponge silicone profiles, tubing and cord.

All extrusions

Every profile, material and secondary operation we extrude.

Other materials

Each compared with silicone.

Channels

U-channel and C-channel edge trim and seals.

Strips and seals

H-channels, L, T and P strips, bulb seals, P and E weather strips.

Tubing, cord and bumpers

Tubing, solid cord for O-rings, bumper strips.

Specifications

Tolerance classes and material callouts.

Secondary operations and tooling

  • Cut to length on an automatic cutter; hand-cut for fragile or short pieces
  • PSA (pressure-sensitive adhesive) backing
  • Splicing into endless rings and frames, with molded corners for exact-radius frames
  • A new die is a one-time line on the quote; an existing profile may need no new die
  • Hollow profiles run on a bridge die

What we need to quote

  • A drawing (PDF), or a CAD file: DXF or STEP
  • A sample part, or a sketch with dimensions
  • Material, durometer and color, or the specification your drawing calls out
  • Quantities: each quote gives several quantity tiers
  • Any documents you need with the parts: certificate of compliance, first article, test reports
  • For a Viton® / FKM profile: the cross-section with dimensions, the ASTM D2000 callout or durometer, whether the drawing calls for the Viton® brand, the fluid and temperature it will see, and the cut length or coil length

Add Viton® / FKM Extrusions to your quote

Tell us about your project. It goes into your quote with any catalog parts you add, and you send it from the quote page.

Frequently asked questions

What do you extrude in Viton® / FKM?
Solid FKM profiles, channels, bulb seals, strips, tubing and cord, to your drawing, sample or sketch. Standard channels, strips and tubing are in our catalog.
Is Viton® the same as FKM?
Viton® is a brand of FKM, the family of fluorocarbon rubbers. We work in both Viton® and generic FKM. If your drawing calls for the brand, say so in your request; otherwise we quote FKM to the ASTM D2000 callout (HK) or the material named on your drawing.
How does silicone compare with Viton® / FKM?
Both take high heat: silicone is typically rated -65 °F to +400 °F and FKM -15 °F to +400 °F. FKM resists fuel, oil and many chemicals; silicone stays flexible in deeper cold and comes in FDA-compliant grades and in colors, but plain silicone is not for fuel. Fluorosilicone keeps most of silicone’s temperature range and adds fuel and oil resistance. Our silicone extrusions page lists the silicone types and durometers.
Is FKM for hot water or steam?
Silicone handles water but not high-pressure steam, and standard FKM grades are not for hot water and steam. Tell us the service conditions and we quote the compound with the profile.
What tolerances do you hold?
Each quote states an RMA tolerance class. We hold RMA E1, E2 or E3; E2 is typical, and tighter tolerances are available on request.
Can FKM cord and profiles be spliced into rings or frames?
Yes. Cord and profiles are spliced and vulcanized into endless rings and frames. Frames with exact-radius corners use a one-time corner mold.
What do you need to quote a Viton® / FKM extrusion?
A drawing, a CAD file (DXF or STEP), a sample or a sketch of the cross-section, with the ASTM D2000 callout or durometer, whether the drawing calls for the Viton® brand, and the quantity. Quotes go out within 1-2 business days.

Typical parts by industry

Extruded parts by industry, in all materials:

Viton® / FKM Extrusions: typical parts by industry
IndustryTypical parts
HVAC, building and constructionConstruction industryProfiles and strips
Aerospace and defenseAerospace industryDefense industryProfiles, door and hatch seals, cord, U-channels, bulb, P and D seals
Electrical and electronicsElectronics industryStrips and profiles
Industrial machineryProfiles, strips, door seals, cord
Seal, gasket and rubber distributorsProfiles, cord, tubing, U-channels

Where Viton® / FKM extrusions are used

FKM is a family of fluorocarbon rubbers. The fluorine in the polymer gives it its combination of heat, fuel, oil and chemical resistance. Typical extruded parts:

  • Fuel system and engine seals
  • Seals and gaskets for chemical processing equipment
  • High-temperature seals
  • Valve and pump seals
  • O-rings spliced from cord for fuel and chemical service

Fluids to check before choosing FKM

FKM resists petroleum oils, fuels and lubricants, many mineral acids, and aromatic and aliphatic hydrocarbons. Its limits are cost, flexibility in the cold, and these fluid groups:

  • Ketones such as MEK and acetone
  • Low-molecular-weight esters and ethers
  • Amines and hot ammonia
  • Strong alkalis such as caustic soda
  • Low-molecular-weight organic acids such as acetic and formic acid
  • Glycol-based brake fluids
  • Hot water and steam (standard grades)

How to specify a Viton® / FKM extrusion

A complete callout names:

  • The cross-section, fully dimensioned, with an RMA tolerance class (E1, E2 or E3)
  • The material: Viton® or generic FKM, a compound, or an ASTM D2000 line callout (HK)
  • Durometer (Shore A)
  • Cut length with its tolerance class, or the coil length
  • Any adhesive backing, splicing or other secondary operation
  • Quantity per release and per year

Quality, documents and terms

Quality and documents

  • ISO 9001:2015 certified quality system
  • Certificates of compliance at no charge, on request
  • First article inspection, test reports and PPAP-type documents on request where offered, quoted separately

Ordering terms

  • Quotes within 1-2 business days, with several quantity tiers
  • Quick lead times; the lead time is stated on every quote
  • FOB Canonsburg, PA
  • Tooling is quoted as a separate one-time charge
  • Overruns and underruns per our quote terms
  • Blanket orders with scheduled releases, with a release kept in stock for rush needs; blanket orders are non-cancellable
  • Expedites quoted as an option

About National Rubber

National Rubber Corporation has supplied custom rubber parts from Canonsburg, Pennsylvania, since 1997. Mixing, extruding, molding, die cutting and splicing are done in house, and all design engineering and manufacturing is done in the USA.

Our quality system is ISO 9001:2015 certified. We work to your drawing and specification, and state the tolerance class, documents and terms on every quote. What we hold to: quality, integrity, customer focus and teamwork.

Request a quote

Send a drawing, a CAD file, a sample or a sketch. Quotes go out within 1-2 business days.

Viton® is a registered trademark of The Chemours Company FC, LLC.