Skip to content
NRC Logo

EPDM Extrusions

Custom EPDM rubber extrusions to your drawing or sample: profiles, channels, bulb seals, weather strips, tubing and cord in solid EPDM. EPDM holds up to sunlight, ozone, rain, hot water and steam, which makes it the usual rubber for outdoor seals.

Silicone is most of what we extrude: solid or sponge silicone is rated over a wider temperature range than EPDM and comes in FDA-compliant grades. Tolerances are held to RMA classes: E2 is typical, and tighter on request.

Solid EPDM profiles, weather strips, tubing and cord. Quick lead times.

  • Solid EPDM profiles to your drawing
  • Weather, ozone, water and steam resistance
  • Silicone extrusions in FDA-compliant grades, -65 °F to +400 °F
  • Splicing into endless rings and frames, PSA backing
  • Coils, spools or cut lengths
  • Quotes within 1-2 business days
Extruded rubber channels, strips and bulb seals

EPDM extrusion specifications

EPDM extrusions: shapes, durometer, callouts, tolerances and put-ups
SpecificationDetail
ProfilesCustom cross-sections to your drawing, in inch and metric sizes
Channels and stripsU-, C- and H-channels; L, T and P strips; P and E weather strips (H, L, T, P and E strips)
Bulb, P and D sealsHollow sealing profiles for doors, lids and hatches, to your drawing
Tubing and cordRound tubing to the ID and OD on your drawing; solid cord for O-rings and splicing (Rubber tubing)
Material calloutsASTM D2000 line callouts (EPDM: AA, BA, CA, DA) (ASTM D2000 callouts)
TolerancesRMA E1, E2 or E3; E2 typical, tighter on request (RMA tolerance classes)
Put-upsCoils, spools or rolls, or cut to length; the coil length is stated on the quote
DiesWe cut our own extrusion dies; a new die is a one-time line on the quote
Testing and inspectionDurometer, rheometer cure, tensile and elongation testing; dimensional inspection against your drawing

Silicone or EPDM extrusions

Both resist sunlight, ozone and weathering. Typical published values for each material:

Silicone or EPDM extrusions
PropertySiliconeEPDM
Typical temperature range-65 °F to +400 °F-40 °F to +275 °F
Sunlight, ozone and weatheringResistsResists
Water, hot water and steamWater; not high-pressure steamResists
Petroleum oils and fuelsNot for gasoline and other fuels; fluorosilicone adds fuel and oil resistanceSwells and softens

Silicone is extruded solid 30–80 Shore A or as sponge, in red, black, white, clear, blue and grey plus orange, green and yellow, and in FDA-compliant grades. Send one drawing and we can quote the profile in both.

Materials

Silicone first: it is most of what we extrude, in the grade, durometer and color on your drawing.

EPDM Extrusions: materials
MaterialFormsNotes
SiliconeSolid and spongeSolid 30–80 Shore A, sponge soft, medium or firm. Most of what we extrude, in FDA-compliant and other grades
EPDMSolidSolid profiles

Standard profiles in our catalog

Sizes with drawings and dimension tables. Any of them can be quoted in EPDM or in silicone.

Silicone extrusions

Solid and sponge silicone profiles, tubing and cord: most of what we extrude.

All extrusions

Every profile, material and secondary operation we extrude.

Channels

U-channel and C-channel edge trim and seals.

Strips and seals

H-channels, L, T and P strips, bulb seals, P and E weather strips.

Tubing, cord and bumpers

Tubing, solid cord for O-rings, bumper strips.

Specifications

Tolerance classes and material callouts.

Secondary operations and tooling

  • Cut to length on an automatic cutter; hand-cut for fragile or short pieces
  • PSA (pressure-sensitive adhesive) backing
  • Splicing into endless rings and frames, with molded corners for exact-radius frames
  • A new die is a one-time line on the quote; an existing profile may need no new die
  • Hollow profiles run on a bridge die

What we need to quote

  • A drawing (PDF), or a CAD file: DXF or STEP
  • A sample part, or a sketch with dimensions
  • Material, durometer and color, or the specification your drawing calls out
  • Quantities: each quote gives several quantity tiers
  • Any documents you need with the parts: certificate of compliance, first article, test reports
  • For an EPDM profile: the cross-section with dimensions, the ASTM D2000 callout or durometer, and the cut length or coil length

Add EPDM Extrusions to your quote

Tell us about your project. It goes into your quote with any catalog parts you add, and you send it from the quote page.

Frequently asked questions

What do you extrude in EPDM?
Solid EPDM profiles, channels, bulb seals, weather strips, tubing and cord, to your drawing, sample or sketch. Standard channels, strips and tubing are in our catalog.
How does silicone compare with EPDM?
Both resist sunlight, ozone and weathering. Silicone is typically rated -65 °F to +400 °F and EPDM -40 °F to +275 °F, and silicone comes in FDA-compliant grades and in colors. Neither is for fuel service. Our silicone extrusions page lists the silicone grades and durometers.
Can EPDM extrusions be used with oil or fuel?
Neither silicone nor EPDM is made for fuel: EPDM swells and softens in petroleum oil, grease and fuel. For oil and fuel service we also extrude fluorosilicone, which keeps most of silicone’s temperature range, and nitrile and FKM.
What tolerances do you hold?
Each quote states an RMA tolerance class. We hold RMA E1, E2 or E3; E2 is typical, and tighter tolerances are available on request.
Can EPDM profiles be spliced into rings or frames?
Yes. Cord and profiles are spliced and vulcanized into endless rings and frames. Frames with exact-radius corners use a one-time corner mold.
What do you need to quote an EPDM extrusion?
A drawing, a CAD file (DXF or STEP), a sample or a sketch of the cross-section, with the ASTM D2000 callout or durometer and the quantity. Quotes go out within 1-2 business days.

Typical parts by industry

Industries that order extruded profiles from us, in all materials, from our order records:

EPDM Extrusions: typical parts by industry
IndustryTypical parts
HVAC, building and constructionConstruction industryProfiles and strips
Aerospace and defenseAerospace industryDefense industryProfiles, door and hatch seals, cord, U-channels, bulb, P and D seals
Electrical and electronicsElectronics industryStrips and profiles
Industrial machineryProfiles, strips, door seals, cord
Seal, gasket and rubber distributorsProfiles, cord, tubing, U-channels

Where EPDM extrusions are used

EPDM is a synthetic rubber made from ethylene, propylene and a small amount of a diene. It is the usual choice for parts that live outdoors or in water, and it does not suit parts that touch petroleum oil, grease or fuel. Typical extruded parts:

  • Weather stripping and door and window seals
  • Outdoor gaskets and enclosure seals
  • Water, steam and coolant seals
  • Bumpers on outdoor equipment

How to specify an EPDM extrusion

A complete callout names:

  • The cross-section, fully dimensioned, with an RMA tolerance class (E1, E2 or E3)
  • The material: a compound, or an ASTM D2000 line callout
  • Durometer (Shore A)
  • Cut length with its tolerance class, or the coil length
  • Any adhesive backing, splicing or other secondary operation
  • Quantity per release and per year

Quality, documents and terms

Quality and documents

  • ISO 9001:2015 certified quality system
  • Certificates of compliance at no charge, on request
  • First article inspection, test reports and PPAP-type documents on request where offered, quoted separately

Ordering terms

  • Quotes within 1-2 business days, with several quantity tiers
  • Quick lead times; the lead time is stated on every quote
  • FOB Canonsburg, PA
  • Tooling is quoted as a separate one-time charge
  • Overruns and underruns per our quote terms
  • Blanket orders with scheduled releases, with a release kept in stock for rush needs; blanket orders are non-cancellable
  • Expedites quoted as an option

About National Rubber

National Rubber Corporation has supplied custom rubber parts from Canonsburg, Pennsylvania, since 1997. Mixing, extruding, molding, die cutting and splicing are done in house, and all design engineering and manufacturing is done in the USA.

Our quality system is ISO 9001:2015 certified. We work to your drawing and specification, and state the tolerance class, documents and terms on every quote. What we hold to: quality, integrity, customer focus and teamwork.

Request a quote

Send a drawing, a CAD file, a sample or a sketch. Quotes go out within 1-2 business days.