Skip to content
NRC Logo

Silicone Extrusions

Custom silicone rubber extrusions to your drawing or sample: solid and hollow profiles, channels, seals, tubing and cord. Silicone is most of what we extrude: standard silicone, platinum-cured silicone, fluorosilicone, and metal-detectable and X-ray-detectable (MD/XR) silicone.

Silicone 30–80 Shore A, in FDA-compliant, high-temperature and the other grades below. Silicone sponge has its own page. Coiled, wound on spools or cut to length, and spliced into endless rings and frames. Tolerances are held to RMA classes: E2 is typical, and tighter on request.

Silicone profiles, tubing and cord. Quick lead times.

  • Silicone: standard, platinum-cured, fluorosilicone and MD/XR
  • Silicone 30–80 Shore A
  • FDA-compliant and high-temperature grades
  • Red, black, white, clear, blue and grey, plus orange, green and yellow
  • Splicing into endless rings and frames, PSA backing
  • Quotes within 1-2 business days
Colored silicone profiles and multi-hole tubes, close-up

Silicone extrusion specifications

Silicone extrusions: shapes, durometer, colors, grades, tolerances and put-ups
SpecificationDetail
ProfilesCustom cross-sections to your drawing, in inch and metric sizes
Channels and stripsU-, C- and H-channels; L, T and P strips; P and E weather strips (H, L, T, P and E strips)
Bulb, P and D sealsHollow sealing profiles for doors, lids and hatches, to your drawing
Tubing and cordRound tubing to the ID and OD on your drawing; solid cord for O-rings and splicing (Rubber tubing)
Silicone typesStandard, platinum-cured, fluorosilicone, and metal-detectable and X-ray-detectable (MD/XR)
Silicone durometer30–80 Shore A
Silicone spongeClosed-cell sponge profiles, cord and tubing, on their own page (Silicone sponge extrusions)
Silicone colorsRed, black, white, clear, blue and grey, plus orange, green and yellow
GradesFDA-compliant, high-temperature and the other grades below
CompoundsWe mix our own silicone compounds: base, catalyst, pigments and additives on our mills
TolerancesRMA E1, E2 or E3; E2 typical, tighter on request (RMA tolerance classes)
Put-upsCoils, spools or rolls, or cut to length; the coil length is stated on the quote
DiesWe cut our own extrusion dies; a new die is a one-time line on the quote
Testing and inspectionDurometer, rheometer cure, tensile and elongation testing; dimensional inspection against your drawing
Orange silicone profile with two hollow chambers, seen end on
Colored silicone tubes and multi-hole profile ends
Fluted silicone tubing in purple, clear and red, nested one inside another
White silicone profile samples in many cross-sections

Silicone types we extrude

Extruded in the type, grade, durometer and color on your drawing.

Silicone Extrusions: silicone types we extrude
Silicone typeNotes
SiliconeStandard silicone, 30–80 Shore A, in FDA-compliant and the other grades below
Platinum-cured siliconeProfiles, tubing and cord to your drawing
FluorosiliconeProfiles to your drawing
Metal-detectable and X-ray-detectable (MD/XR)For lines with metal detectors or X-ray inspection

Grades available

Made to the grade or specification your drawing or purchase order calls out:

  • FDA-compliant
  • USP Class VI grades
  • NSF compounds
  • 3-A grades
  • UL-rated grades
  • Metal-detectable and X-ray-detectable
  • Platinum-cure silicone
  • High-temperature silicone
  • MIL-SPEC callouts
  • ASTM D2000 callouts
  • PSA-backed (pressure-sensitive adhesive)

Certificates of compliance on request.

Standard profiles in our catalog

Sizes with drawings and dimension tables. Any of them can be quoted in silicone.

All extrusions

Every profile, material and secondary operation we extrude.

Channels

U-channel and C-channel edge trim and seals.

Strips and seals

H-channels, L, T and P strips, bulb seals, P and E weather strips.

Tubing, cord and bumpers

Tubing, solid cord for O-rings, bumper strips.

Silicone sponge

Sponge profiles, and silicone sponge sheet for cut gaskets.

Specifications

Tolerance classes and material callouts.

Secondary operations and tooling

  • Cut to length on an automatic cutter; hand-cut for fragile or short pieces
  • PSA (pressure-sensitive adhesive) backing
  • Splicing into endless rings and frames, with molded corners for exact-radius frames
  • A new die is a one-time line on the quote; an existing profile may need no new die
  • Hollow profiles run on a bridge die

What we need to quote

  • A drawing (PDF), or a CAD file: DXF or STEP
  • A sample part, or a sketch with dimensions
  • Material, durometer and color, or the specification your drawing calls out
  • Quantities: each quote gives several quantity tiers
  • Any documents you need with the parts: certificate of compliance, first article, test reports
  • For a silicone profile: the cross-section with dimensions, the grade, and the cut length or coil length

Add Silicone Extrusions to your quote

Tell us about your project. It goes into your quote with any catalog parts you add, and you send it from the quote page.

Frequently asked questions

What hardness can you extrude in silicone?
Silicone 30–80 Shore A. Silicone sponge, in soft, medium or firm, is on our silicone sponge extrusions page.
Which types of silicone do you extrude?
Standard silicone, platinum-cured silicone, fluorosilicone, and metal-detectable and X-ray-detectable (MD/XR) silicone, to the type your drawing or purchase order names.
Which silicone grades do you extrude?
FDA-compliant grades, USP Class VI grades, NSF compounds, 3-A grades, UL-rated grades, metal-detectable and X-ray-detectable grades, platinum-cure and high-temperature silicone, and MIL-SPEC and ASTM D2000 callouts, to the grade your drawing or purchase order names.
Which colors are available?
Red, black, white, clear, blue and grey, plus orange, green and yellow.
Do you make your own silicone compound?
Yes. We mix our own silicone compounds, and test durometer, rheometer cure, tensile and elongation.
What tolerances do you hold?
Each quote states an RMA tolerance class. We hold RMA E1, E2 or E3; E2 is typical, and tighter tolerances are available on request.
Do you extrude other rubbers too?
Yes. Our custom rubber extrusions page lists every material we extrude, with the profile shapes and secondary operations.
What do you need to quote a silicone extrusion?
A drawing, a CAD file (DXF or STEP), a sample or a sketch of the cross-section, with the grade, durometer, color and quantity. Quotes go out within 1-2 business days.

Typical parts by industry

Industries that order extruded profiles from us, in all materials, from our order records:

Silicone Extrusions: typical parts by industry
IndustryTypical parts
Food, beverage and dairyFood & Dairy industryProfiles, spliced rings and manway gaskets, metal-detectable parts, door and lid seals, U-channels
Pharmaceutical and life sciencesHealthcare industryProfiles, tubing, door and lid seals, U-channels, bulb, P and D seals
Electrical and electronicsElectronics industryStrips and profiles
Industrial machineryProfiles, strips, door seals, cord

Where silicone extrusions are used

Silicone stays flexible in cold that stiffens most rubbers and keeps its properties at heat that breaks most others down. It resists ozone and UV, and is made in FDA-compliant grades for food contact.

Silicone extrusions seal oven and appliance doors, food and dairy equipment, lighting and electrical enclosures, and lids and hatches. General-purpose silicone has lower tear and abrasion strength than most rubbers, so it suits static seals and gaskets.

Clear silicone extruded channels and custom profiles

How to specify a silicone extrusion

A complete callout names:

  • The cross-section, fully dimensioned, with an RMA tolerance class (E1, E2 or E3)
  • The silicone type: standard, platinum-cured, fluorosilicone or MD/XR
  • The grade: FDA-compliant, high-temperature, or a specification callout
  • Durometer (Shore A) and color
  • Cut length with its tolerance class, or the coil length
  • Any adhesive backing, splicing or other secondary operation
  • Quantity per release and per year

Quality, documents and terms

Quality and documents

  • ISO 9001:2015 certified quality system
  • Certificates of compliance at no charge, on request
  • First article inspection, test reports and PPAP-type documents on request where offered, quoted separately

Ordering terms

  • Quotes within 1-2 business days, with several quantity tiers
  • Quick lead times; the lead time is stated on every quote
  • FOB Canonsburg, PA
  • Tooling is quoted as a separate one-time charge
  • Overruns and underruns per our quote terms
  • Blanket orders with scheduled releases, with a release kept in stock for rush needs; blanket orders are non-cancellable
  • Expedites quoted as an option

About National Rubber

National Rubber Corporation has supplied custom rubber parts from Canonsburg, Pennsylvania, since 1997. Mixing, extruding, molding, die cutting and splicing are done in house, and all design engineering and manufacturing is done in the USA.

Our quality system is ISO 9001:2015 certified. We work to your drawing and specification, and state the tolerance class, documents and terms on every quote. What we hold to: quality, integrity, customer focus and teamwork.

Request a quote

Send a drawing, a CAD file, a sample or a sketch. Quotes go out within 1-2 business days.