Skip to content
NRC Logo

Neoprene Extrusions

Custom neoprene (polychloroprene) rubber extrusions to your drawing or sample: profiles, channels, bulb seals, tubing and cord in solid neoprene. Neoprene balances moderate oil resistance with weather and ozone resistance and good toughness.

Silicone is most of what we extrude: solid or sponge silicone is rated over a wider temperature range than neoprene and comes in FDA-compliant grades. Tolerances are held to RMA classes: E2 is typical, and tighter on request.

Solid neoprene profiles, channels, tubing and cord. Quick lead times.

  • Solid neoprene (CR) profiles to your drawing
  • Weather, ozone and moderate oil resistance
  • Silicone extrusions in FDA-compliant grades, -65 °F to +400 °F
  • Splicing into endless rings and frames, PSA backing
  • Coils, spools or cut lengths
  • Quotes within 1-2 business days
Extruded rubber channels, strips and tubing laid out in a row

Neoprene extrusion specifications

Neoprene extrusions: shapes, durometer, callouts, tolerances and put-ups
SpecificationDetail
ProfilesCustom cross-sections to your drawing, in inch and metric sizes
Channels and stripsU-, C- and H-channels; L, T and P strips; P and E weather strips (H, L, T, P and E strips)
Bulb, P and D sealsHollow sealing profiles for doors, lids and hatches, to your drawing
Tubing and cordRound tubing to the ID and OD on your drawing; solid cord for O-rings and splicing (Rubber tubing)
Material calloutsASTM D2000 line callouts (Neoprene: BC, BE) (ASTM D2000 callouts)
TolerancesRMA E1, E2 or E3; E2 typical, tighter on request (RMA tolerance classes)
Put-upsCoils, spools or rolls, or cut to length; the coil length is stated on the quote
DiesWe cut our own extrusion dies; a new die is a one-time line on the quote
Testing and inspectionDurometer, rheometer cure, tensile and elongation testing; dimensional inspection against your drawing

Silicone or neoprene extrusions

Both resist weather and ozone. Typical published values for each material:

Silicone or neoprene extrusions
PropertySiliconeNeoprene
Typical temperature range-65 °F to +400 °F-40 °F to +225 °F
Weather and ozoneResistsResists
Oils, greases and fuelsNot for gasoline and other fuels; fluorosilicone adds fuel and oil resistanceModerate oil and grease exposure; not long-term fuel immersion
Abrasion and flex crackingLower in general-purpose grades; high-strength grades narrow the gapResists
FlameUL-rated gradesResists burning better than most hydrocarbon rubbers

Silicone is extruded solid 30–80 Shore A or as sponge, in red, black, white, clear, blue and grey plus orange, green and yellow, and in FDA-compliant grades. Send one drawing and we can quote the profile in both.

Materials

Silicone first: it is most of what we extrude, in the grade, durometer and color on your drawing.

Neoprene Extrusions: materials
MaterialFormsNotes
SiliconeSolid and spongeSolid 30–80 Shore A, sponge soft, medium or firm. Most of what we extrude, in FDA-compliant and other grades
Neoprene (CR)SolidSolid profiles

Standard profiles in our catalog

Sizes with drawings and dimension tables. Any of them can be quoted in neoprene or in silicone.

Silicone extrusions

Solid and sponge silicone profiles, tubing and cord: most of what we extrude.

All extrusions

Every profile, material and secondary operation we extrude.

Channels

U-channel and C-channel edge trim and seals.

Strips and seals

H-channels, L, T and P strips, bulb seals, P and E weather strips.

Tubing, cord and bumpers

Tubing, solid cord for O-rings, bumper strips.

Specifications

Tolerance classes and material callouts.

Secondary operations and tooling

  • Cut to length on an automatic cutter; hand-cut for fragile or short pieces
  • PSA (pressure-sensitive adhesive) backing
  • Splicing into endless rings and frames, with molded corners for exact-radius frames
  • A new die is a one-time line on the quote; an existing profile may need no new die
  • Hollow profiles run on a bridge die

What we need to quote

  • A drawing (PDF), or a CAD file: DXF or STEP
  • A sample part, or a sketch with dimensions
  • Material, durometer and color, or the specification your drawing calls out
  • Quantities: each quote gives several quantity tiers
  • Any documents you need with the parts: certificate of compliance, first article, test reports
  • For a neoprene profile: the cross-section with dimensions, the ASTM D2000 callout or durometer, and the cut length or coil length

Add Neoprene Extrusions to your quote

Tell us about your project. It goes into your quote with any catalog parts you add, and you send it from the quote page.

Frequently asked questions

What do you extrude in neoprene?
Solid neoprene profiles, channels, bulb seals, strips, tubing and cord, to your drawing, sample or sketch. Standard channels, strips and tubing are in our catalog.
Is neoprene the same as CR or polychloroprene?
Yes. Neoprene is the common name for polychloroprene, abbreviated CR. A drawing may call it out by any of the three names, or by an ASTM D2000 line (BC or BE).
How does silicone compare with neoprene?
Both resist weather and ozone. Silicone is typically rated -65 °F to +400 °F against neoprene’s -40 °F to +225 °F, and comes in FDA-compliant grades and in colors; neoprene has moderate oil resistance and good toughness. Our silicone extrusions page lists the silicone grades and durometers.
What tolerances do you hold?
Each quote states an RMA tolerance class. We hold RMA E1, E2 or E3; E2 is typical, and tighter tolerances are available on request.
Can neoprene profiles be spliced into rings or frames?
Yes. Cord and profiles are spliced and vulcanized into endless rings and frames. Frames with exact-radius corners use a one-time corner mold.
What do you need to quote a neoprene extrusion?
A drawing, a CAD file (DXF or STEP), a sample or a sketch of the cross-section, with the ASTM D2000 callout or durometer and the quantity. Quotes go out within 1-2 business days.

Typical parts by industry

Industries that order extruded profiles from us, in all materials, from our order records:

Neoprene Extrusions: typical parts by industry
IndustryTypical parts
HVAC, building and constructionConstruction industryProfiles and strips
Aerospace and defenseAerospace industryDefense industryProfiles, door and hatch seals, cord, U-channels, bulb, P and D seals
Electrical and electronicsElectronics industryStrips and profiles
Industrial machineryProfiles, strips, door seals, cord
Seal, gasket and rubber distributorsProfiles, cord, tubing, U-channels

Where neoprene extrusions are used

Neoprene is often chosen when a part sees some oil and some weather and no single condition is extreme. Typical extruded parts:

  • Gaskets and seals for HVAC and refrigeration equipment
  • Weather seals
  • Bumpers and edge trim

How to specify a neoprene extrusion

A complete callout names:

  • The cross-section, fully dimensioned, with an RMA tolerance class (E1, E2 or E3)
  • The material: a compound, or an ASTM D2000 line callout (BC or BE)
  • Durometer (Shore A)
  • Cut length with its tolerance class, or the coil length
  • Any adhesive backing, splicing or other secondary operation
  • Quantity per release and per year

Quality, documents and terms

Quality and documents

  • ISO 9001:2015 certified quality system
  • Certificates of compliance at no charge, on request
  • First article inspection, test reports and PPAP-type documents on request where offered, quoted separately

Ordering terms

  • Quotes within 1-2 business days, with several quantity tiers
  • Quick lead times; the lead time is stated on every quote
  • FOB Canonsburg, PA
  • Tooling is quoted as a separate one-time charge
  • Overruns and underruns per our quote terms
  • Blanket orders with scheduled releases, with a release kept in stock for rush needs; blanket orders are non-cancellable
  • Expedites quoted as an option

About National Rubber

National Rubber Corporation has supplied custom rubber parts from Canonsburg, Pennsylvania, since 1997. Mixing, extruding, molding, die cutting and splicing are done in house, and all design engineering and manufacturing is done in the USA.

Our quality system is ISO 9001:2015 certified. We work to your drawing and specification, and state the tolerance class, documents and terms on every quote. What we hold to: quality, integrity, customer focus and teamwork.

Request a quote

Send a drawing, a CAD file, a sample or a sketch. Quotes go out within 1-2 business days.