Skip to content
NRC Logo

Spliced O-Rings and Gaskets

Spliced and vulcanized O-rings, endless rings, manway gaskets and frame gaskets, made from our own extruded cord and profiles in silicone, Viton® / FKM, nitrile, EPDM and neoprene, from 3 in ID up to large diameters.

We extrude the cord or a custom profile, cut it to length and vulcanize the ends together, so the joint is cured rubber and no mold is needed for each size. Frames are spliced at the corners, or given exact-radius corners injection molded with a one-time corner mold.

O-rings, endless rings, manway and frame gaskets. Quick lead times.

  • Spliced from our own extruded cord and profiles
  • Rings from 3 in ID, in inch and metric cord sizes
  • Vulcanized butt, angled and T-joints
  • Frames with spliced or molded corners
  • No mold needed for each ring size
  • Quotes within 1-2 business days
Extruded profiles, spliced rings and a spliced frame gasket

Spliced O-ring and gasket specifications

Spliced O-rings and gaskets: ring sizes, cross-sections, joints, frames, durometer and colors
SpecificationDetail
O-rings and endless ringsFrom 3 in ID; large diameters to your drawing
Manway gasketsSized to your tank or vessel opening, spliced from cord or a profile
Frame gasketsExtruded profiles spliced at the corners; molded exact-radius corners with a one-time corner mold
Cross-sectionStandard inch and metric cord, or a custom profile to your drawing (Custom rubber extrusions)
JointsVulcanized butt joint, angled joint or T-joint
DurometerTo your specification
ColorsRed, white, black, clear, blue and grey
Splicing and other operationsSplicing, corner molding, cut to length, PSA backing (Secondary fabrication)

Materials

Spliced from cord or profiles in the material on your drawing. Silicone first, then by the volume we splice.

Spliced O-Rings and Gaskets: materials
MaterialFormsNotes
SiliconeCord and profilesMost spliced rings, manway gaskets and frames; FDA-compliant and other grades
Viton® / FKMCordSpliced O-rings
Nitrile (NBR)CordSpliced O-rings
EPDMCordSpliced O-rings
Neoprene (CR)CordSpliced O-rings

Grades available

Spliced rings and frames are made to the grade your drawing or purchase order calls out:

  • FDA-compliant
  • USP Class VI grades
  • Metal-detectable and X-ray-detectable
  • High-temperature silicone
  • ASTM D2000 callouts

Certificates of compliance on request.

Cord, profiles, size charts and other gaskets

Standard cord and profiles to splice from, the standard O-ring sizes, and the other gasket types.

O-ring cord

Standard cord cross-sections, inch and metric.

Standard O-ring sizes

Sizes below 3 in ID are molded O-rings.

Profiles for frames

Channels, bulb seals and strips to splice into frames.

All gasket types

Cut, molded, spliced and spiral wound gaskets.

How a spliced ring or frame is made

  • The cord or custom profile is extruded to your cross-section
  • Cut to length for the ring diameter or the frame side
  • The ends are vulcanized together: butt, angled or T-joint
  • Exact-radius corners use a one-time corner mold, quoted as a separate line
  • PSA (pressure-sensitive adhesive) backing where the drawing calls for it
  • Deflash, inspect and bag

What we need to quote

  • A drawing (PDF), or a CAD file: DXF or STEP
  • A sample part, or a sketch with dimensions
  • Material, durometer and color, or the specification your drawing calls out
  • Quantities: each quote gives several quantity tiers
  • Any documents you need with the parts: certificate of compliance, first article, test reports
  • For a ring: the inside diameter (or circumference), cross-section and joint type
  • For a manway gasket: the opening size and shape, the cross-section and the joint type
  • For a frame: the frame size, the profile drawing and the corner type

Add Spliced O-Rings and Gaskets to your quote

Tell us about your project. It goes into your quote with any catalog parts you add, and you send it from the quote page.

Frequently asked questions

What sizes of spliced O-rings can you make?
Rings from 3 in ID up to large diameters, in standard inch and metric cord or a custom cross-section. Standard O-rings smaller than 3 in ID are molded; see the size charts.
How is a spliced O-ring made?
We extrude the cord, cut it to length and vulcanize the ends together as a butt joint or an angled joint, so the joint is cured rubber. No mold is needed for each size.
Can you make frame gaskets?
Yes. Extruded profiles are spliced at the corners, or exact-radius corners are injection molded onto the profile with a one-time corner mold. Profiles can also be joined in a T-joint.
Can any profile be spliced?
Most can. Very small profiles, thin walls and unusual hollow shapes are hard to splice cleanly; send the drawing and we will say so on the quote.
What do you need to quote a spliced ring or gasket?
The inside diameter or opening size, the cross-section or profile drawing, the material, durometer and quantity, or a sample. Quotes go out within 1-2 business days.

Typical parts by industry

Typical spliced parts by industry, from our order records:

Spliced O-Rings and Gaskets: typical parts by industry
IndustryTypical parts
Food, beverage and dairyFood & Dairy industrySpliced O-rings, manway gaskets, door and lid seals
Pharmaceutical and life sciencesHealthcare industrySpliced rings, door and lid seals
Aerospace and defenseAerospace industryDefense industrySpliced rings, door and hatch seals
Industrial machinerySpliced rings, door seals
Water and wastewaterSpliced rings, door seals

Spliced rings and molded O-rings

A molded O-ring needs a mold for every size. A spliced ring is cut from extruded cord and its ends are vulcanized together, so any diameter from 3 in ID up can be made without a mold. Standard sizes below 3 in ID are molded O-rings.

The same method joins profiles into frames and door seals: the profile is cut to length, mitered or butted at the corners and vulcanized, or fitted with molded corners where the drawing needs an exact radius.

How to specify a spliced O-ring or gasket

A complete callout names:

  • Inside diameter, or the opening size and shape for a manway gasket, or the frame size
  • Cord cross-section, or the profile drawing
  • Material or grade, durometer and color
  • Joint type: butt, angled or T-joint; corner type for a frame
  • Quantity per release and per year

Quality, documents and terms

Quality and documents

  • ISO 9001:2015 certified quality system
  • Certificates of compliance at no charge, on request
  • First article inspection, test reports and PPAP-type documents on request where offered, quoted separately
  • PPAP documents are not offered for vulcanized O-rings

Ordering terms

  • Quotes within 1-2 business days, with several quantity tiers
  • Quick lead times; the lead time is stated on every quote
  • FOB Canonsburg, PA
  • Tooling is quoted as a separate one-time charge
  • Overruns and underruns per our quote terms
  • Blanket orders with scheduled releases, with a release kept in stock for rush needs; blanket orders are non-cancellable
  • Expedites quoted as an option

About National Rubber

National Rubber Corporation has supplied custom rubber parts from Canonsburg, Pennsylvania, since 1997. Mixing, extruding, molding, die cutting and splicing are done in house, and all design engineering and manufacturing is done in the USA.

Our quality system is ISO 9001:2015 certified. We work to your drawing and specification, and state the tolerance class, documents and terms on every quote. What we hold to: quality, integrity, customer focus and teamwork.

Request a quote

Send a drawing, a CAD file, a sample or a sketch. Quotes go out within 1-2 business days.

Viton® is a registered trademark of The Chemours Company FC, LLC.