Die Cut and Flash Cut Gaskets
Die cut and flash cut gaskets to ±0.003". Custom flat gaskets cut to your print, with bolt holes and cut-outs, up to 60" × 120". Flash cutting needs no die.
Gasket materials: silicone (solid and sponge), Viton® / FKM, compressed non-asbestos fiber, neoprene, EPDM (solid and sponge), nitrile, cork-rubber, SBR (red rubber), PTFE, polyethylene and polyurethane foams, and flexible graphite.
Flat gaskets cut to your print. Quick lead times.
- Die cut and flash cut gaskets to ±0.003"
- Parts up to 60" × 120"
- Flash cutting from DXF or DWG, no die to buy
- Full-face and ring flange gaskets to ASME flange class callouts
- PSA backing
- Quotes within 1-2 business days

Die cut gasket specifications
| Specification | Detail |
|---|---|
| Tolerance | Die cut and flash cut gaskets to ±0.003" |
| Part size | Die cut and flash cut parts up to 60" × 120" |
| Flash cutting | 60" × 120" table, up to 1.00" thick, no die, cut from DXF or DWG |
| Width | Up to 72" seamless (roll width) |
| Gasket shapes | Rings, full-face gaskets with bolt holes, frames and cut-outs, to your print |
| Flange gaskets | Full-face and ring gaskets, cut to ASME flange class callouts (Flange gaskets) |
| Thickness | Thin sheet through thick pads, to your print |
| Durometer | To your specification |
| Adhesive | PSA (pressure-sensitive adhesive) backing |
| Tooling | No die for flash cutting; a die for repeat parts is a one-time line on the quote |
| Quantities | Single prototypes through production runs |
Gasket materials
Cut from the material on your drawing. Silicone first, then by the volume we cut.
| Material | Forms | Notes |
|---|---|---|
| Silicone | Solid and sponge | Sheet and sponge gaskets; FDA-compliant grades |
| Viton® / FKM | Solid | Gaskets, washers and pads |
| Compressed non-asbestos fiber | Sheet | Flange gaskets and rings |
| Neoprene (CR) | Solid | Gaskets, washers and pads |
| EPDM | Solid and sponge | Gaskets, washers and pads |
| Nitrile (NBR) | Solid | Gaskets, washers and pads |
| Cork-rubber | Sheet | Gaskets |
| SBR (red rubber) | Solid | Gaskets, washers and pads |
| PTFE | Sheet | Gaskets |
| Foams: polyethylene and polyurethane | Sheet | Pads and gaskets |
| Flexible graphite | Sheet | Gaskets |
Other gaskets, sheet and washers
The other gaskets we make, and the washers and sheet in our catalog.
All gasket types
Cut, molded, spliced and spiral wound gaskets.
Die cutting
Die cut and flash cut washers, pads and parts beyond gaskets.
Silicone sheet and sponge
Solid, soft and high-strength silicone sheet; silicone sponge.
Specifications
Tolerance classes and material callouts.
Tooling and secondary operations
- Flash cutting needs no die: prototypes and short runs are cut straight from your CAD file
- A die for repeat parts is a separate one-time line on the quote
- Bolt holes cut with the gasket
- PSA (pressure-sensitive adhesive) backing
What we need to quote
- A drawing (PDF), or a CAD file: DXF or STEP
- A sample part, or a sketch with dimensions
- Material, durometer and color, or the specification your drawing calls out
- Quantities: each quote gives several quantity tiers
- Any documents you need with the parts: certificate of compliance, first article, test reports
- For a flat gasket: outside and inside dimensions, bolt holes, material and thickness
Add Die Cut Gaskets to your quote
Tell us about your project. It goes into your quote with any catalog parts you add, and you send it from the quote page.
Frequently asked questions
- What tolerance do you hold on die cut gaskets?
- Die cut and flash cut gaskets are cut to ±0.003".
- What is the difference between die cut and flash cut gaskets?
- A die cut gasket is cut by a steel-rule die in one stroke, which suits repeat parts in volume. A flash cut gasket is cut by a knife that follows your CAD file, with no die and no tooling charge.
- How large a gasket can you cut?
- Die cut and flash cut parts up to 60" × 120", and up to 72" wide in one piece.
- Do I need to buy a die?
- No die is needed for flash cutting. A die for repeat parts is quoted as a separate one-time line.
- Which materials can you cut?
- Silicone (solid and sponge), Viton® / FKM, compressed non-asbestos fiber, neoprene, EPDM (solid and sponge), nitrile, cork-rubber, SBR (red rubber), PTFE, polyethylene and polyurethane foams, and flexible graphite.
- Do you make other kinds of gaskets?
- Yes. Our custom rubber gaskets page lists every gasket type we make: cut, molded, spliced from extrusions and spiral wound.
- What do you need to quote a die cut gasket?
- A drawing or a DXF or DWG file, a sample or a sketch, with the material, thickness and quantity. Flange gaskets can be quoted from the pipe size and flange class. Quotes go out within 1-2 business days.
Typical parts by industry
Typical die cut gaskets by industry, from our order records:
| Industry | Typical parts |
|---|---|
| Oil, gas and energy | Full-face and ring flange gaskets, pads and isolators |
| Water and wastewater | Flange gaskets, pads |
| Electrical and electronicsElectronics industry | Washers, pads, flange gaskets |
| Food, beverage and dairyFood & Dairy industry | Flange gaskets |
| Pharmaceutical and life sciencesHealthcare industry | Flange gaskets |
Die cut and flash cut gaskets
Die cutting presses a steel-rule die through the sheet, cutting the outline, bolt holes and cut-outs in one stroke. It is the fastest way to cut repeat gaskets in volume; the die is a one-time cost.
Flash cutting moves a knife over the sheet along the path in your CAD file. There is no die, so prototypes and short runs carry no tooling charge, and a drawing change needs only a new file.

How to specify a die cut gasket
A complete flat gasket callout names:
- Outside and inside dimensions, or the pipe size and flange class for a flange gasket
- Bolt circle, hole count and hole size, and any cut-outs
- Material or specification, durometer and thickness
- Adhesive backing, if any
- Quantity per release and per year
Quality, documents and terms
Quality and documents
- ISO 9001:2015 certified quality system
- Certificates of compliance at no charge, on request
- First article inspection, test reports and PPAP-type documents on request where offered, quoted separately
Ordering terms
- Quotes within 1-2 business days, with several quantity tiers
- Quick lead times; the lead time is stated on every quote
- FOB Canonsburg, PA
- Tooling is quoted as a separate one-time charge
- Overruns and underruns per our quote terms
- Blanket orders with scheduled releases, with a release kept in stock for rush needs; blanket orders are non-cancellable
- Expedites quoted as an option
About National Rubber
National Rubber Corporation has supplied custom rubber parts from Canonsburg, Pennsylvania, since 1997. Mixing, extruding, molding, die cutting and splicing are done in house, and all design engineering and manufacturing is done in the USA.
Our quality system is ISO 9001:2015 certified. We work to your drawing and specification, and state the tolerance class, documents and terms on every quote. What we hold to: quality, integrity, customer focus and teamwork.
Request a quote
Send a drawing, a CAD file, a sample or a sketch. Quotes go out within 1-2 business days.
Viton® is a registered trademark of The Chemours Company FC, LLC.